工厂自我评价

工厂自我评价（通用18篇）

工厂 篇1

　　Under the leadership of the teacher we lined up into the Shaanxi flames limited liability company's production workshop, after the relevant person in charge of the distribution I and the other four students were assigned to the bakelite workshop.

　　Into the workshop, the master of the workers on the performance of our very happy, enthusiastic greeting me, as far as possible to me to introduce me to do the work, I just came in a sense of tension swept away. In the workers under the master's explanation we understand the next week's work content. And found that we seem to be doing a great cause, because we processed the antenna is to be installed in the tank above. And many of these antennas are sold abroad. The thought of their use of the antenna in some of their own to do, and my heart can not say proud.

　　The antenna body has four sections, connected to one from the low to high diameter in turn, from the bottom to the top in turn; a connecting base, 2 with a fixed rope, fixed rope and a metal, is used to connect the antenna , The main package a total of 7 positions, 7 accessories can be loaded into, and then a line of the rope, the antenna package folded up.easy to carry.

　　Our work that trouble to not trouble, but need to have enough patience.The first is to use a small blade to a white plastic end of a dust removal.Because the blade is very hand the school is very difficult to take, a long time, the hand will be blisters, even though we have to clean up, or inevitable, but the thought of these workers uncle for decades to do the job, admiration Feeling arises spontaneously. They are for the motherland of tomorrow, not afraid of suffering, then we have nothing to fear.

　　The second task is to remove the antenna under the core, there is the fiberglass shell to the gelatinization treatment, it seems simple, it is not true, because the plastic outside the plastic film is very hard, accidentally cut Finger, the master of the workers in the explanation, we found a small hand does not cut the hand tips. The third task is the casing, in order to prevent the antenna interference, will use the plastic tube to isolate the antenna.

　　The fourth work has a good name to listen to this is a high-tech live, in a one-meter-long plastic tube wearing a thin copper wire is only 0.3 mm.Really is not an easy thing, even more depressing is that sometimes when you wear to the end of the moment, just so bad 2 cm, just can not pass, and my heart that hate Egypt do not know who invented the antenna practice, although complaining There are still, but we still learn to make fun of, we five people started the game, to see who wear the fast and. In this way the work was also very easy to solve. We summed up the truth - do not just have the patience to do this, there is another condition, that is luck, good luck, smooth. Bad luck, then move.

　　The fifth task is welding, this welding is different from the radio welding, it is the soldering iron fixed, mobile components to complete the welding. As the temperature is high, it requires us to fast, accurate, and requires a beautiful weldment.

　　The sixth task is to insulate small transformers with insulating varnishes.This work is the most easy to complete. Is the best learning.

　　The seventh job is the mat, although good to do, but need a little effort.Because there are many components will not affect the role of the antenna, so even if the production is not very qualified, in order not to waste, will continue to use. This requires a little more effort.

　　The eighth task is to tie the line, it sounds very easy to do it is not simple. The reason is not only to tie, but also tied labor, so as not to tamper with the antenna in the glass tank. Worker master taught us to tie the method, the beginning of the tie is very awkward, tied the number of more, even find work is the door to fun.

　　Week internship is the deepest feelings of some of the Fiberhome Group of dedicated workers. Here the workers are very amiable and friendly people, often some humorous words to our work to add fun. The most touching is that when we can not personally participate in the Olympic torch relay, they play radio for us so that we hear the whole process of tracking the torch relay.

　　The rapid development of modern science and technology era, the types of high-tech products more and more, production technology and production processes are also different. But no matter what kind of products, from raw materials to produce products are processed to follow certain production principles, through a number of major equipment and process to complete. And never try to use machines instead of manual, no matter how fast the machine can not replace human labor. And this is not only labor, or passion to pass.

工厂自我评价 篇2

　　3月23日在进入进厂实习阶段我们在公司培训中心接受有关人员对公司的基本情况介绍以及接受三级安全教育和保密员对实习生进行保密知识教育。分组到分厂和车间实习，主要在钨钴合金厂、110kv变电站和公司动力供应中心的维修车间维修电工班。工段有关领导向我们介绍情况并对我们提出实习期间的要求和车间的有关安全教育，并把我们分到班组跟师傅学习实践，到班组后班长交待明天的工作内容以及实习期间的注意事项。

　　3月24日我们按照班组的要求早上八点到601幼儿园对一台变压器的开关柜更换。主要工作是将已经坏了的开关柜换下换上新的，把有用的进行回收，期间要安装变压器保护罩、三相四线制数字式电能表(带电流互感器)安装，重新安装断路器并确定进柜线的位置和保护管的孔径大小并进行电焊切割定位，下午工作结束变电中心验收合格后送电(填写停/供电工作票)。工程完成以后班长交待明天的工作内容。

　　进入公司后我们首先是在维修车间，然后我分配在维修电一班，在班组跟着师傅学习了不少东西许多跟他们学习交流。更是通过虚心请教，在师傅的指导帮忙协助下，我很快的适应了这里的工作，经过这几天的过渡，我已经初步掌握了变压器开关柜安装的步骤和工厂布线接线规程等维修相关一些基本注意事项。不过对于相关的专业知识我知道甚少，于是我虚心请教师傅同时自己也阅读相关的书籍，并细心专研，最终问题得到很好解决。

　　在车间实习的这段时间，虽然有时候工作很苦很累，但是，我从中体会到了实践中的专业技术，不断积累实践技术经验。通过生产实习，使我们了解和掌握了变压器开关柜的更换数字式电表的安装工厂线路布线方法和步骤。为进一步学好专业技术，从事这方面的接线、布线、调试、安装等打下良好的基础。

　　在这次生产实习过程中，不但对所学习的知识加深了了解，更加重要的是更正了我们的劳动观点和提高了我们的独立工作能力等。

工厂自我评价 篇3

　　一、通过系统完善的汽车专业知识的学习，有扎实的专业基础知识，并且有一定的汽车管理知识。课外大量猎阅图书馆中汽车类书刊资料。了解中国汽车产业发展动态方向，特别是汽车后市场服务领域。知道汽车维修行业发展现状及趋势。善于学习新的知识方法工艺，分析和解决问题的能力强，能够熟练的利用互联网查询汽车维修资料，收集本行业最新信息。

　　二、“老老实实为人，本本分做事”是一个立足社会的根本，也是我时刻铭记的一句话。勇于创新，善于开创，能承受较高的工作压力；吃苦耐劳，注重合作，具有年轻人火一样的工作热情和活力。

　　三、学会把自己的技能应用在实际的应用上。

　　成为一个有技术，会管理，善经营汽车人，将是我一直努力和奋斗的目标，我一定会成为一个有才能的汽车维修大师。

工厂自我评价 篇4

　　在专业实习过程中，我们首先要了解其生产原理，弄清生产的工艺流程和主要设备的构造及操作。其次，在专业人员指导下，通过实习过程见习产品的设计、生产及开发等环节，初步培养我们得知识运用能力。

　　在工人师傅的指导下，实际动手操作生产流程，锻炼了自己观察能力及知识运用能力，社会工作能力得到了相应的提高。

　　在实习过程中，工人师傅还拿出制作好的成品为我们一一讲解原理，并为我们解释一些不懂的疑问。我相信这些东西使我们课本中永远无法学到的东西。

　　在实习的过程中，我不仅从企业员工那里学到了知识和技能，更使我学会了企业中科学的管理方式和感受到他们的敬业精神。感到了生活的充实和学习的快乐，以及获得知识的满足。真正零距离的接触社会，使我们消除了走向社会的恐惧心里，更使我们对未来充满了信心，能以良好的心态去面对社会。与此同时，我们也体验到了工作的艰辛，了解了当前社会大学生所面临的严峻问题，促使自己努力学习更多的知识，为自己今后参加工作奠定良好的基础。

　　本次实习我相信是我们每个人的美好开始，它让我们认识到实践出真知这句话的重要性。相信这将使我们以后学习和生活中不可多得的财富。

工厂自我评价 篇5

　　Over the past year, I have been dedicated to work in a creative and loving way, and have achieved some achievements. However, there are also some problems and shortcomings, mainly in the following points:

　　1. Safety aspects

　　Safety management did not do bit, strength is not enough; safety training is not in place; check not in place. In many cases, due to the labor intensity of the staff is larger, more physical exertion, so the completion of the day's output, do the work of sorting the scene ignored the phenomenon, there are irregularities in the operation of the repeated repeated crushing accidents . Now want to come to these accidents, I have an inescapable responsibility. First: in the organization and management team in the process of daily safety training is not really so that every employee will always be safe production in mind; Second: in the security check did not do the whole process of tracking the entire inspection; Finally: in the event of an accident did not promptly Sum up lessons learned to avoid the recurrence of similar incidents. So that my staff suffered pain, so that the damage to the honor and interests of the workshop I am very self-blame. To this end, I decided to work in the future to strengthen the intensity of safety training and improve the form of training and strengthen the security team security responsibilities, so that each team staff are aware of the importance of safety in production, resulting in "everyone's attention to safety Production, everyone involved in production safety, "a good atmosphere.

　　2. Quality control aspects

　　Quality is produced, rather than check out, that is to say about total quality management, in accordance with the objectives and requirements to seriously do a good job in every aspect, every process.At the same time quality inspection is very important, especially in the production process of quality inspection can effectively avoid the occurrence of quality accidents and quality problems, after the event for the prevention and control in advance, change from passive to active.Although the company from top to bottom are beginning to pay attention to quality, but in practice there are still many problems, especially between the team, for example, in the weaving process there are many areas to be improved. To solve these problems is not a team can do a good job, which requires a number of relevant team work together, I think in order to do a good job of quality, we must grasp the "strict, fine, real" principle, to strict management, Careful and meticulous, pay close attention to implementation.

　　3. Team management

　　Although the management level of the team has been improved in the past year, there are still some problems, such as: the standardized work situation of the staff to be improved, the technical level of the staff to be improved, the enthusiasm of the staff has not been fully mobilized Wait.No high-level management, there is no high-quality staff, there is no high-quality products. Therefore, I will focus on the future work to improve the overall quality of the team and staff issues, make full use of spare time, and more arrangements for some of the knowledge of the standardization of training, strive for a shorter period of time so that the overall quality of staff has a larger Promotion.

工厂自我评价 篇6

　　在实习过程中，我们先后了解了机械加工工艺的知识及方法，铸造工艺及设备的知识，各种机床和数控系统的知识，常用刀具的结构、选择、用途等方面，我们通过实习了解到了实践与理论的差异。 通过实习期间的体会，我更加深刻地认识到了理论和实践并不是完全相同的，我们不能够把书本上的知识照搬、照抄到生产中来，这样不仅有时达不到理论效果，有时甚至会造成很大的经济损失和资源浪费。所以，在以后的学习当中，我会注意理论和实践的结合，学以致用，任何理论和知识只有与实践相结合，才能发挥出作用。 将理论与实践结合起来，包括各种设备的实物勘察和设备操作步骤以及注意事项，还有各工序实际上的流程。这些大都和书本上相同，通过对机械设备的观察，弥补了理论知识的不足之处，加深了对知识的巩固。

工厂自我评价 篇7

　　我的理念是：在年轻的季节我甘愿吃苦受累，只愿通过自己富有激情、积极主动的努力实现自身价值并在中做出最大的贡献。

　　作为初学者，我具备出色的学习能力并且乐于学习、敢于创新，不断追求卓越；作为参与者，我具备诚实可信的品格、富有团队合作精神；作为领导者，我具备做事干练、果断的风格，良好的沟通和协调能力。受过系统的经济相关专业知识训练，有在多家单位和公司的和兼职；有很强的忍耐力、意志力和吃苦耐劳的品质，对工作认真负责，积极进取，个性乐观执着，敢于面对困难与挑战。

工厂自我评价 篇8

　　一、通过系统完善的汽车专业知识的学习，有扎实的专业基础知识，并且有一定的汽车管理知识。课外大量猎阅图书馆中汽车类书刊资料。了解中国汽车产业发展动态方向，特别是汽车后市场服务领域。知道汽车维修行业发展现状及趋势。善于学习新的知识方法工艺，分析和解决问题的能力强，能够熟练的利用互联网查询汽车维修资料，收集本行业最新信息。

　　二、“老老实实为人，本本分做事”是一个立足社会的根本，也是我时刻铭记的一句话。拥有良好的职业素质和职业操守，能够忠于自己的企业，将个人">个人的职业生涯规划与企业的发展紧密的结合。勇于创新，善于开创，能承受较高的工作压力;吃苦耐劳，注重合作，具有年轻人火一样的工作热情和活力。

　　三:学会把自己的技能应用在实际的应用上...

　　成为一个有技术，会管理，善经营汽车人。将是我一直努力和奋斗的目标。当然在这个人">个人才济济的社会中我不一定是最好的，但我一定会努力的挤身于这一优秀的行列之中。在中国的汽车业中实现自己的社会价值。 我一定会成为一个有才能的汽车维修大师..也感谢..给我一个这样的平台写出!!!!

工厂自我评价 篇9

　　Over the past year, I have been dedicated to work in a creative and loving way, and have achieved some achievements. However, there are also some problems and shortcomings, mainly in the following points:

　　1. Safety aspects

　　Safety management did not do bit, strength is not enough; safety training is not in place; check not in place. In many cases, due to the labor intensity of the staff is larger, more physical exertion, so the completion of the day's output, do the work of sorting the scene ignored the phenomenon, there are irregularities in the operation of the repeated repeated crushing accidents . Now want to come to these accidents, I have an inescapable responsibility. First: in the organization and management team in the process of daily safety training is not really so that every employee will always be safe production in mind; Second: in the security check did not do the whole process of tracking the entire inspection; Finally: in the event of an accident did not promptly Sum up lessons learned to avoid the recurrence of similar incidents. So that my staff suffered pain, so that the damage to the honor and interests of the workshop I am very self-blame. To this end, I decided to work in the future to strengthen the intensity of safety training and improve the form of training and strengthen the security team security responsibilities, so that each team staff are aware of the importance of safety in production, resulting in "everyone's attention to safety Production, everyone involved in production safety, "a good atmosphere.

　　2. Quality control aspects

　　Quality is produced, rather than check out, that is to say about total quality management, in accordance with the objectives and requirements to seriously do a good job in every aspect, every process.At the same time quality inspection is very important, especially in the production process of quality inspection can effectively avoid the occurrence of quality accidents and quality problems, after the event for the prevention and control in advance, change from passive to active.Although the company from top to bottom are beginning to pay attention to quality, but in practice there are still many problems, especially between the team, for example, in the weaving process there are many areas to be improved. To solve these problems is not a team can do a good job, which requires a number of relevant team work together, I think in order to do a good job of quality, we must grasp the "strict, fine, real" principle, to strict management, Careful and meticulous, pay close attention to implementation.

　　3. Team management

　　Although the management level of the team has been improved in the past year, there are still some problems, such as: the standardized work situation of the staff to be improved, the technical level of the staff to be improved, the enthusiasm of the staff has not been fully mobilized Wait.No high-level management, there is no high-quality staff, there is no high-quality products. Therefore, I will focus on the future work to improve the overall quality of the team and staff issues, make full use of spare time, and more arrangements for some of the knowledge of the standardization of training, strive for a shorter period of time so that the overall quality of staff has a larger Promotion.

　　Future efforts

　　The new year represents a new beginning, new opportunities and new challenges. I will redouble their efforts to seriously improve the business, the level of work for the company and workshop development, contribute their own strength.

　　I am determined to do the following in the following year:

　　1. Strengthen learning, broaden the knowledge. Strive to study stamping expertise and related management knowledge;

　　2. In the principle of seeking truth from facts, so the situation issued, the next situation reported; really good leadership of the assistant;

　　3. Strengthen communication and cooperation with the workshop brothers and team, to the advanced team to learn, strengthen management, and strive to make the team to form a solid, hard work and good atmosphere;

　　4. Fully completed the workshop to the various tasks for the workshop to bring out a tough fight, hard-working team.

　　Finally, I hope the company leadership in the future work, as always, support me, I will be more outstanding performance of the company's return on the leadership of care and love, because I will always work!Thank you!

工厂自我评价 篇10

　　In the twinkling of an eye, one year's work is spent in a tense and busy, the new year new starting point new opportunities and new challenges, I will work harder to learn, will improve my ability to work, do not live up to you Expectations, I will strive to do their jobs.

　　Since taking part in the work, I earnestly complete the work, study hard, think positively, individual ability rises gradually. I am thinking, learning, work has made new progress, but I also recognize that they have too many shortcomings, theoretical knowledge and low level of operation, skills are not strong. As a qualified operator, we must learn the rules of production equipment operating procedures, process safety knowledge and process parameters. Outside the loading operation process to pay attention to many things, no small mistake, there will be a big life-threatening risk of loss of economic dime, so everyone should take their own work to do to ensure safety in production . (Internal control of the job is very important, single-system, data, audit, monitoring, communication, communication, do not take five and so on.Three check six pairs, check the driver tank volume table, pressure filling certificate, dangerous transport card ). In addition, the train is running fast also rely on the front, because just to work soon, in terms of experience, or from thinking there are many deficiencies in these areas I got the company leadership, department heads and squad workers of the correct guidance, The dragon is to carry out job training skills training, so that we have a better opportunity to enhance their theoretical knowledge of security and operational skills, in the learning process, I have a lot of uncertainty, we always patiently explain to me, I would like to express my heartfelt gratitude to all of you.

　　In short, into the company has more than a year (in the car loading unit under the leadership of master Ke) along the way, enjoy the pain, but also the luxury of happiness, there is no credit for labor, but either laughter or tears, Working for life, working for our dreams, we are brave to face a lot of difficulties, I think these will be the growth of each of us to the glorious stage of bit by bit.

　　 upcoming, future work may be more difficult, more and more competition will give us a great deal of pressure, as long as the heart relaxed, the pressure into motivation, this is what we have been continuous progress Of the common ground, with the share of the ideals of hard work we will do better!

工厂自我评价 篇11

　　Time flies, years have been quietly away from us, looking back over the past year, the heart can not help but be filled with emotion. Over the past year, the company leadership and colleagues in the support and help, I am strict demands on themselves, in accordance with the requirements of the company and the workshop, to better complete their own work, and through efforts to make their own work in the new modelOf the breakthrough, the work has been greatly improved. The work in 20xx is summarized as follows:

　　First, the main work done

　　1. Workshop construction and management have been strengthened

　　Because I did not work for a long time, because of the chaotic management of the workshop, so in the workshop there are many problems to be solved. In order to solve these problems, I propose to take measures to regulate the implementation of positive incentive system in 20xx. For the better performance of the team to give employees plus assessment points, and for the poor performance of the staff are determined to deduct a certain assessment points. Take this rewards and punishments, fair and impartial assessment methods, I believe that the implementation of team staff will be greatly improved and will improve the team cohesion.

　　2. Pay close attention to safety management

　　After finishing the relative to the company's other workshops for more security risks, more prone to accidents, in the past 20xx, there have been several work-related accidents, these accidents have been to the company and the workshop losses. "Fool with blood for the lesson, the wise use of lessons to avoid accidents", although the power is not great, but shoulders the whole class of more than a dozen employees of the important task of life safety. Therefore, for security work I have never relaxed, Yueyue Jiang, every day.

　　3. To ensure product quality

　　With the expansion of the company's size and visibility of the increasing customer Xinhui the quality requirements are also getting higher and higher, so the company's high-level attention to product quality has also been referred to an unprecedented level. Xinhui as a whole the last pass, after finishing the responsibility to shoulder more and more. I know that as a workshop monitor, their work directly affect the quality of the work of the workshop. For the company's responsibility, I have been in quality control has been lax, and colleagues in a timely manner and timely communication and exchange of information, for the production process problems, defects never easily let go. At the same time to strengthen the importance of the quality of staff awareness, require everyone to do a good job self-inspection and mutual inspection work to ensure that a problem from the class into the market.

　　4. Actively participate in shop improvement activities

　　After finishing the workshop is like a big family, I live and work in this warm family every day, as a member of this family I think I have the obligation and responsibility to build her better harmony. Therefore, over the past year, I plot and workshop improvement activities, and mobilize the enthusiasm of team members, the use of collective wisdom of the workshop made a lot of valuable improvements.

　　5. Strengthen their own learning, improve the business level

　　Because of the heavy burden of their own body, and their knowledge, ability and experience with a good competent monitor have a certain distance, so the total can not be taken lightly, has been learning, learning to the books, learning to the surrounding leaders, To learn from colleagues, and actively improve the quality of their business, and strive to improve work efficiency and quality of work, for work initiative.Through this year's efforts to feel that they still have some progress, be able to calmly deal with the daily work of the various problems, in the organization and management capacity, comprehensive analysis, coordination and writing skills and verbal ability, etc. A great improvement to ensure that the work of the normal operation of the post, to the right attitude towards the various tasks, with a strong professionalism, sense of responsibility.

工厂自我评价 篇12

　　理论学习方面：本人积极参加党支部的组织生活，在思想上、政治上、行动上和党中央保持高度一致，坚定共产主义信念;认真学习党的xx届六中全会的精神、hjt书记“”精神、方永刚同志先进事迹等理论知识。

　　同时，作为一名工程技术人员，本人还认真学习与工作相关的网络、视频等相关知识，积极参加公司组织的各类业务培训，不断提高业务能力和工作能力。工作方面：一是本人积极向领导前辈们学习他们好的经验，好的方法，通过一步一步学习、一点一滴积累，进一步提高自身的业务知识能力水平;二是通过主动请缨出差，在实践中锻炼自身协调能力和工作能力，在带队施工过程中，发现存在问题，积极向领导们请教，加以改进。存在的不足：一年来，本人在思想、工作等方面都有一定程度的提高，但与优秀党员的标准、与党和人民的要求还存在一定差距，今后我将更加努力、勤奋工作，不断提高自己的党性修养，不断增强为人民服务的本领，积极向优秀党员的标准靠拢。

工厂自我评价 篇13

　　。在20xx年5月12日我在广西市南宁货运西站物流服务有限公司进行毕业生产实习。这是第一次正式与社会接轨踏上工作岗位。更进一步去研究物流。三个多月的实习锻炼时间在人生的长河中只有那么一小段。但是给我的收获却很大，通过接触和吸收新的事物。增长了见识，开阔了视野，又增长了实践操作能力，解决了我的一些思想认识问题，促进了自身世界观的转变通过在广州市新邦物流服务有限公司花都花动营业部受到的温暖，教育和鼓舞，使我增强了自信心和自豪感，坚定了自己的信念，更为自己日后就业指明了方向，对自己的社会定位和自身价值进行了一次客观评价，发现自己与现实之间的差距，解决了眼高手低的问题。

　　在工作过程中发现平时对物流的概念，仅仅只是停留在浅显的书本知识。对于物流的本身觉得很神秘，不敢想象现实中的物流业和心目中的物流业有什么不同之处。对于物流，我只知道它是：运输、储存、搬运、包装、流通加工、配送、信息处理等基本功能实施的有机结合。但没有想到它的实际操作却没有这么的简单。三个月简单了解，使我对于物流配送有了更加深刻的认识。中国的物流业虽然没有国外发达，可这并代表中国物流业的落后，一些原则性[譬如中国劳动力廉价的国情]严重的制约了中国物流业信息技术化的发展速度。这一点作为国人的物流人士有着切肤的体会。货物运转速度慢，货差货损率高难以避免，高层货架利用率严重低下。野蛮的装卸态度更是制约中国物流业发展的瓶颈之一。

工厂自我评价 篇14

　　Since the beginning of my career, I have been constantly strengthening my self-cultivation, striving to improve the ideological and moral level, earnestly carry out the deepening of the cultural and professional knowledge, continue to explore new knowledge, forge ahead, and actively carry out intelligent range The work, the complete performance of a electrician's work responsibilities, from a good example to take the lead role. And actively participate in technological exchanges and technological innovation activities, the earth to do a good job, help, with the role, and fully completed the tasks assigned to the higher levels and targets in the company's production and development play its due role.Now I have been working since the professional and technical work are summarized as follows:

　　First, consciously strengthen theoretical study, and strive to improve personal qualities

　　Without a firm and true political orientation, there will be no positive guiding ideology. In order to continuously improve their political and ideological quality, the past few years I have been very concerned about national affairs, concerned about the situation at home and abroad, combined with the impact of changes in the situation of enterprises to analyze and put this idea into practical action to the production process to ensure In their thinking and action has always been consistent with the party and enterprise. At the same time, this idea into the work and study, the constant pursuit of their own progress. In order to be successful, a person's career must first learn how to behave! Especially in our highly technical work, to see things carefully, do things to concentrate on, to learn to be modest. Can not have the slightest sloppy and error. All the first work attitude to correct, have a good professional quality, work to be serious and responsible, subject to leadership arrangements, open to others to listen to advice and advice, to unite colleagues, courtesy, warm service.

　　Second, correct work attitude, play a leading role

　　I fully understand the importance of mechanical and electrical management during the construction period. In particular, it contains most of the invisible electrical infrastructure and engineering. It is necessary to supervise and inspect the problems at any time. We must solve the problems and never hastily. Otherwise, Eradication, which we place mechanical and electrical management in front of a test and responsibility. As an electrician, the responsibility and the burden of my duty. Therefore, in the usual work, I made myself some of the strict requirements: one in the face of dirty tired and bitter at work to grab the front of the workers dry, and more than the workers do the next; In the face of technical problems is to come forward and do their best to overcome technical difficulties; I always adhere to do my best to do everything to the interests of the company. Third, I asked myself to be responsible; I think that since he is an electrician, then the level of business and many other aspects of the general workers should be stronger than some. In the company assigned tasks, the general workers to complete the more difficult tasks, they should take the initiative to take on more, but not with the workers buck-passing, to make the teacher who demeanor, Yong burden. I usually not only ask their own, in practice, I also do according to these requirements.

　　Third, strengthen business learning, improve the technical level

　　Science and technology continue to develop today, one day do not learn to be backward. In particular, this piece of electrical automation, no one hundred percent of all proficient in finished, so I usually have time to look at professional books. Over the past year, I have collected a large number of new professional books, constantly enrich themselves, continue to grasp the new knowledge. Such as "electrical design drawing", "electronic technology", "modern frequency technology", "DC in industrial applications" and so on, in the process of learning this knowledge, I learned a lot of new knowledge, such as: PLC programming control Principle, ABB inverter settings and control principles, SIPMOS high-power two-way SCR control principle, and so I really benefit! Not only broadened my knowledge, is still largely improved my technical level, But also I have a higher level of theoretical and technical knowledge of the study had a keen interest.

　　Fourth, the development of skills to each other to achieve social services

　　In the usual work, I often carry out technical discussions and exchanges with other workers, to share their knowledge and share with others, and learn from others who do not understand their knowledge and achieve common progress. I am fully integrated theory and practice, continue to accumulate experience, continue to study new business, which makes my skill level to a skilled, use the ease of the point.

　　To sum up, I feel worthy of the honorable title of electrician! But I, as a technical staff, can not be narcissistic now, but still continue to strengthen their own learning, continue to learn from each other, and only then can keep up with The pace of the times steady progress, but also be able to better serve the enterprises and serve the community.

工厂自我评价 篇15

　　In the long-term work practice adhere to the "safety first, prevention first", strictly enforce the safety rules and regulations, based on their own positions, take the initiative to play a subjective initiative at the same time, adhere to the standard criteria for strict requirements themselves,Amount to complete the production work tasks.

　　Style solid, hard work hard working. Can strictly according to the standardization request, the procedure, the system and the measure, carries out each work, when meets the difficulty, perseverance, takes the initiative to overcome the difficult question which faces to face each duty which the leadership delivers. In the early stage of the workshop merger, the working facilities of the newly established Lechang power supply workshop were not complete. The workshop network could not be used. In order to transmit the production information in time, the communication equipment was put into operation to ensure the smooth flow of production information. In 20__, I carried out the first contact catenary repair, as a electric power for the contact network focused on the preparation of the work plan, from learning to application, from ignorant to gradually understand, all embodies the tenacious struggle of professionalism.

　　Consciously strengthen the theory and business learning, theory and practice for the workshop safety management services. In daily production and life of diamond business technology and adhere to the modern business culture and scientific knowledge, and constantly improve their theoretical level, business ability and quality of cultivation, and focus on the knowledge used in production safety practice, with the workshop leaders do a good job in production management, For the first-line production to contribute. In the early 20__ to combat snow and ice disaster work, take the initiative to grasp the front-line dynamic information on the scene of the fault repair situation, equipment dynamic situation in a timely manner to make statistics, summarize, reported materials for the leadership to understand the dynamics of the scene to provide first-hand information, Quickly convey the higher order, whether fault repair or normal equipment inspection, regardless of day and night, adhere to earnestly complete all the summary of statistical materials reported work.

　　Team management and construction work, work independently. Since the team to play the team building management work, to combine the safety management team, closely around the theme of security work, to be diligent in thinking, to explore, loyalty, dare to dare tube, dare to dare to listen to team Staff advice, subject to the workshop leadership arrangements, do the right to insist on doing a good job, there are gaps in the initiative to find reasons, adjust the working methods, so as to sum up experience and improve the quality of work. Lechang power supply plant tube equipment scattered, daily management team and complex work, bow net, hydropower all kinds of professional team has to distinguish between different types of work groups of relatively unified management, no doubt with considerable difficulty, need to pay more labor , Often without rest for this day and night to work.

工厂自我评价 篇16

　　Blink of an eye, busy in a quarter. I really feel in the past work, leadership and team in the workshop staff support and support, their gradually mature. Through the workshop organization of various training and activities, I have their own problems and deficiencies have a deeper understanding of the team management awareness has also been further improved. Here, I combine their own ideological situation, the actual work of self-criticism:

　　In the ideological, positive, positive motivated.

　　As a team leader, I am in the production, adhere to the quality, safety supervision, careful observation of the team members of the ideological trends, pay attention to communication methods and staff to make the greatest efforts and staff stand together to learn and work together to complete the team , Pay attention to the training of staff ability, at work, I know the importance of learning, seize every opportunity to earnestly study the excellent monitor, in continuous learning and practice constantly improve their management level and communication skills.

　　At work, dedication and love, self-discipline.

　　In work, strict self-discipline, strict to use, according to the size of life.Adhere to the implementation of various systems, from time to time for the sake of employees, according to the rules of the company and the power to move the shop; a realistic man, the team raised a variety of staff questions never avoid, team also received the honor, team.

　　Self-existing problems:

　　1, policy theory Water evaluation is not high enough, the theory of learning is not enough, the management level is not high.

　　2, the first mode of consciousness is not strong. On their own lax, the standard is not high, just flies, not flies hard, can not use advanced words and deeds affect and drive employees. The work of the lack of first to strive for excellence and fighting spirit of innovation, study and study the theoretical knowledge and professional knowledge is not a certain height.

　　3, lack of awareness of innovation, the lack of bright spots.

　　4, open-minded enough, failing to easily impatient, lack of control

　　Fourth, the corrective measures:

　　1, to strengthen theoretical study, and constantly improve their political quality. Consciously strengthen the exercise to the idea of self-discipline armed with their own minds, to those dedicated, positive, innovative colleagues to learn, work more brains.

　　2, in order to be a high sense of responsibility, dedication, hard work, solid, the courage to advance the work to complete the task, in the process of regional management of the workshop team to a higher level.

　　3, establish team team spirit. As a team leader, I want to always keep a clear head, keep up with the pulse of the times, give full play to the subjective initiative. To consciously strengthen the exercise, at work, learn to sum up and observe, to improve the sense of pioneering and innovative

　　4, I am concerned about the labor and the new interns is not enough. In the future study, work more concerned about them, usually more chat to understand the ideological trends.

　　In short, as a team leader in the work to play an exemplary role, should be based on their own work, and strive to do their jobs, love and respect their jobs, fine drilling business. In the future study and work, I will continue to reflect on the continuous progress in the reflection. Humbly accept my colleagues around me to make suggestions and opinions, and strive to improve themselves, so that their continuous progress, play an exemplary role for the team to serve good, do a monitor should do the obligation, and strive to be a good team leader.

工厂自我评价 篇17

　　在实践中能够将理论联系实际，通过解决在实践中遇到的问题，增长了自已见识和解决事情的能力，还学到了许多在以前没有学到的东西。在生活上，认识了许多一起工作的同事们与他们相处融洽，在学习上能互相学习跟请教，能够互相帮助，为人处世上也收获了许多。很感谢海昌公司给我这次难得的实习机会和工作，也很感谢领导和车主管周班长对我的信任和关心，我也很珍惜这次机会，在这三个月试用中学会了很多东西，我相信如果能转正将会为海昌工作的更多，自已也很学到更多。

　　热情随和，活波开朗，具有进取精神和团队精神，有较强的动手能力。良好协调沟通能力，适应力强，反应快、积极、灵活，爱创新!提高自己，适应工作的需要。所以我希望找一份与自身知识结构相关的工作，如,文员,助理可以有更大的空间来证明自己，发展自己!

　　主要通过学校的老师专业只是的培训,我的专业技能提供不少,对汽车维修的这样专业有了更深的了解..为了让自己的技术更加全面.我经常上网查阅网上有关汽车维修的专业知识.

　　一、通过系统完善的汽车专业知识的学习，有扎实的专业基础知识，并且有一定的汽车管理知识。课外大量猎阅图书馆中汽车类书刊资料。了解中国汽车产业发展动态方向，特别是汽车后市场服务领域。知道汽车维修行业发展现状及趋势。善于学习新的知识方法工艺，分析和解决问题的能力强，能够熟练的利用互联网查询汽车维修资料，收集本行业最新信息。

　　二、“老老实实为人，本本分做事”是一个立足社会的根本，也是我时刻铭记的一句话。拥有良好的职业素质和职业操守，能够忠于自己的企业，将个人">个人的职业生涯规划与企业的发展紧密的结合。勇于创新，善于开创，能承受较高的工作压力;吃苦耐劳，注重合作，具有年轻人火一样的工作热情和活力。

　　三:学会把自己的技能应用在实际的应用上...

　　成为一个有技术，会管理，善经营汽车人。将是我一直努力和奋斗的目标。当然在这个人">个人才济济的社会中我不一定是最好的，但我一定会努力的挤身于这一优秀的行列之中。在中国的汽车业中实现自己的社会价值。 我一定会成为一个有才能的汽车维修大师..也感谢..给我一个这样的平台写出自我鉴定!!!!

工厂自我评价 篇18

　　I work, has been engaged in a line of electrical work, over the years, I have strict demands on themselves, work conscientiously. Mainly from the following aspects to sum up:

　　First, the ideological and political learning and democratic management

　　I earnestly studied Marxism-Leninism, Mao Zedong Thought and Deng Xiaoping Theory, and guided the production practice in the spirit of the three represents.

　　Actively participate in all kinds of democratic activities, participate in democratic management, work hard at home, work well, and do a good job as a production frontline electrician.

　　Second, the safety aspects

　　1, implement the spirit of the higher documents to improve the safety awareness of workers, enhance the sense of responsibility of workers.

　　2, to implement and improve the safe use of electricity organizational system, improve safety management rules and regulations.

　　3, to strengthen safety management team to consolidate the security base.

　　4, one to ensure that electricity consumers to ensure their own safety and security of others.

　　Third, training and learning

　　Over the years, I actively participate in various learning and training, and strive to learn the basic knowledge of electrician knowledge, power supply system knowledge, line devices, lighting devices, grounding devices, transformer operation and maintenance, motor repair and maintenance, electrical control circuit, PLC Control and other related knowledge system. Every time I learn, I have learned some new theories, and used to guide the work practice, applied to the work, to the factory power supply system, the control system improvement, receives the consistent high praise.

　　Fourth, in terms of energy saving

　　In energy saving, I actively use the knowledge has been learned for the factory to do a lot of energy saving aspects of the contribution. Such as the transformation of the factory line, the annual energy saving for the factory more than ten million degrees. While the old factory equipment, electrical transformation, so that some of the old equipment to rejuvenate.

　　Fifth, the practice of production

　　In the production practice, for example: motor electrical fault detection and troubleshooting examples. Electrical: 1, check the lead wire insulation is intact, the motor is overheated, check whether the wiring meets the nameplate requirements, winding and the first, the end of power is correct; 2, measuring insulation resistance and DC resistance test insulation is damaged. 3, power on the check after the end of the problem found, you can directly power test with a three-phase voltage regulator began to impose a lower voltage, and then gradually increased to the rated voltage, etc .. 3, power-on check whether there is no open circuit, short circuit and grounding; . Use the above inspection method, for the factory more than one motor to find fault, and fix it. Timely summary of various symptoms and solutions, and documented, to guide the practice, but also improve their business level. In short, the production practice in the rules and regulations on the wall, in strict accordance with the rules and regulations. Over the years, the factory did not occur with a life-related electrical safety problems, and the factory through a number of technical transformation, equipment operation more scientific and rationalized.

工厂自我评价相关文章：